| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Emission Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000030JA00AX |
| Title: 3UR-FE EMISSION CONTROL: AIR INJECTION DRIVER: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 2)
(a) Install the air injection control driver with the 2 screws.
Torque: 2.0 N·m (20 kgf·cm, 18 in·lbf)
2. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 1)
(a) Install the air injection control driver with the 2 screws.
Torque: 2.0 N·m (20 kgf·cm, 18 in·lbf)
(b) Install the 2 bolts.
Torque: 5.0 N·m (51 kgf·cm, 44 in·lbf)
3. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY
(a) Install the air injection control driver with the 3 bolts.
Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)
|
(b) Connect the 2 wire harness clamps. |
(c) Install the ground cable with the bolt.
Torque: 8.0 N·m (82 kgf·cm, 71 in·lbf)
|
(d) Connect the 4 air injection control driver connectors. |
|
|